在华为eNSP模拟器中设置路由与本机网卡通信

这次采用的是华为eNSP模拟器，来设置路由器和电脑的本地网卡的通信。

1、在模拟器中添加一个AR1220路由，设置GE0/0/0接口与本机网卡绑定。

2、启动AR1路由，进入GE0/0/0接口： interface giga 0/0/0

3、设置GE0/0/0接口IP地址与本机的在同一子网： ip add 192.168.1.7 24

4、退出并与本机互ping，如果安装有360安全卫士、QQ电脑管家等安全/杀毒软件，请关闭软件或将eNSP加入白名单。

在ensp模拟器中的命令如下：

<Huawei>system-view

Enter system view, return user view with Ctrl+Z.

[Huawei]interface giga 0/0/0

[Huawei-GigabitEthernet0/0/0]quit

[Huawei]ping 192.168.1.7

  PING 192.168.1.7: 56  data bytes, press CTRL_C to break

    Request time out

    Request time out

    Request time out

  --- 192.168.1.7 ping statistics ---

    3 packet(s) transmitted

    0 packet(s) received

    100.00% packet loss

[Huawei]interface giga 0/0/0

[Huawei-GigabitEthernet0/0/0]ip address 192.168.1.7 24

[Huawei-GigabitEthernet0/0/0]

Jan 25 2013 09:22:20-08:00 Huawei %%01IFNET/4/LINK_STATE(l)[0]:The line protocol

 IP on the interface GigabitEthernet0/0/0 has entered the UP state.

Jan 25 2013 09:22:20-08:00 Huawei DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5

.25.191.3.1 configurations have been changed. The current change number is 1, th

e change loop count is 0, and the maximum number of records is 4095.

[Huawei-GigabitEthernet0/0/0]quit

[Huawei]ping 192.168.1.7

  PING 192.168.1.7: 56  data bytes, press CTRL_C to break

    Reply from 192.168.1.7: bytes=56 Sequence=1 ttl=255 time=30 ms

    Reply from 192.168.1.7: bytes=56 Sequence=2 ttl=255 time=1 ms

    Reply from 192.168.1.7: bytes=56 Sequence=3 ttl=255 time=20 ms

    Reply from 192.168.1.7: bytes=56 Sequence=4 ttl=255 time=20 ms

    Reply from 192.168.1.7: bytes=56 Sequence=5 ttl=255 time=30 ms

  --- 192.168.1.7 ping statistics ---

    5 packet(s) transmitted

    5 packet(s) received

    0.00% packet loss

    round-trip min/avg/max = 1/20/30 ms

[Huawei]ping 192.168.1.111

  PING 192.168.1.111: 56  data bytes, press CTRL_C to break

    Reply from 192.168.1.111: bytes=56 Sequence=1 ttl=64 time=30 ms

    Reply from 192.168.1.111: bytes=56 Sequence=2 ttl=64 time=1 ms

    Reply from 192.168.1.111: bytes=56 Sequence=3 ttl=64 time=30 ms

    Reply from 192.168.1.111: bytes=56 Sequence=4 ttl=64 time=1 ms

    Reply from 192.168.1.111: bytes=56 Sequence=5 ttl=64 time=20 ms

  --- 192.168.1.111 ping statistics ---

    5 packet(s) transmitted

    5 packet(s) received

    0.00% packet loss

    round-trip min/avg/max = 1/16/30 ms

[Huawei]

到此，华为路由器就可以和自己本机上的网卡实现数据交换和共享了。